MEASUREMENT
NOT SENSITIVE
MIL-PRF-3122J
24 October 2000
SUPERSEDING
MIL-PRF-3122H
17 January 1996
PERFORMANCE SPECIFICATION
LEATHER, CATTLEHIDE, FOR FOOTWEAR
UPPERS AND GUSSET, CHROME TANNED, FATLIQUORED
This specification is suggested for use by all Departments and agencies of the Department of
Defense.
1. SCOPE.
1.1 Scope. This specification covers smooth finish, full grain and corrected grain, chrome
tanned, fatliquored, cattlehide leather for footwear uppers and gusset.
1.2 Classification. The leather will be of two types in the following treatments as specified
(see paragraph 6.2):
Type I Leather, Cattlehide, for Footwear Uppers, Chrome Tanned, Fatliquored
Type II Leather, Cattlehide, Gusset, Chrome Tanned, Fatliquored (see paragraph 6.3)
Treatment A Treated for resistance to water absorption
Treatment B Treated for resistance to water penetration
Treatment C Not treated for resistance to water
Treatment A/B - Treated for resistance to water absorption and penetration
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may
be of use in improving this document should be addressed to: Defense Supply Center
Philadelphia, Clothing and Textiles Directorate, Attn: DSCP-CRFD, 700 Robbins Avenue,
Bldg. 6D, Philadelphia, PA 19111-5096, by using the Standardization Document Improvement
Proposal (DD Form 1426) appearing at the end of this document or by letter.
AMSC N/A
FSC 8330
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business